How Import Substitution is Averse to Localization?

on 22/06/2023

K-Electric’s national policy dialogue on ‘Localization for Growth’ stripped of the reasons that hinder the localization of engineering products in Pakistan. Of them, some are related to the policies that we formulate, and others are attached to the concepts of localization. For example, Dr. Musadiq Malik, Minister of State for Petroleum believes localization and import substitution are adverse to each other and the practice of import substitution that is on in Pakistan for over a decade would never allow localization in Pakistan.In his view, we in Pakistan create a lazy industrial footprint by encouraging import substitution through imposing duties, the ban on imports, and issuing licenses to selected industrial groups.Resultantly, he claimed we had not been able to export any significant products which bring a popular name to Pakistan. He referred to this policy in the country’s automobile sector and asked if we have ever exported even a single product as yet. ‘In pursuance of this policy, we did nothing but made the vehicles expensive.’ He believed they would be proven insane if they pursue the same policy in the name of localization.Malik said prosperity comes through productivity which leads to localization and long-term productivity. He added innovation was a must that comes through academia-industry collaboration. Unless we put the system on for innovation, we cannot localize. He advised Pakistan’s industry whose chief executives were listening to him patiently that they should do something new that produces clusters.Referring to examples of Boston, and Berkley, clusters exist between Oxford and Cambridge and Pakistan’s Sialkot, he explained how clusters are created. Also, he talked about collaboration between industry, academia, and government which he said was part of the recipe for creating clusters. But he said this was not enough. We have to change our entire education system.He then focused on what the governments should do. The government has to create a level playing field that he believed is nonexistent in the country. He unveiled how the selected industry leaders continue receiving favors and how they have tilted the level playing field in the industrial sector of Pakistan. He said the government has to demonstrate its political will, then only Pakistan would be able to make a conducive atmosphere for localization and export of products, ensuring a level playing field that will create fierce healthy competition that would lead the country to prosperity.The moot was very well attended and had five significant MoUs signed between the local industry and K-Electric as the latter plans to invest Rs.484 billion in the next seven years and wants the local industry to replace products being imported for power.CEO K-Electric, Moonis Alvi said the utility bought the same products again and again for power generation, transmission, and distribution systems. Of the investment in the next seven years, 70 percent of the amount will be for the import of electrical and power products. We can make those products in Pakistan and we will do it with local industry, he said adding local industry has to be revived through government policies.

Selecting Chillers, Chilled Water Systems
Selecting the right chiller is generally dictated by capacity, and there are many philosophies on the best way to control, operate, and
calculate system operational costs.

on 20/06/2023

Learning Objectives
• Understand the variety of chiller options based on load requirements.
• Learn to calculate a simplified cost/ton estimate for estimating chiller initial investment costs.
• Know the appropriate calculations for determining chiller plant operational costs.
Chilled water systems are cooling systems that circulate chilled water throughout a building for cooling and dehumidifying a building’s air. They come in all shapes, sizes, and configurations. Chilled water systems are closed-loop systems, meaning that the system water is continually recirculated and not exposed to atmospheric pressure, similar to domestic water systems. While selecting the type of chiller to use is generally dictated by capacity, there are still many philosophies on the best way to control, operate, and calculate system operational costs.
The first step in chiller selection is understanding the options available. A building’s block load will determine the overall capacity, whereas part load will determine the number and quantity of chillers required, with multiple chillers providing the ability to stage chillers in response to load. A block load will take into account building diversity and load changes based on exposure, internal and external loads, and building schedules because all portions of the building will not be peaking simultaneously. The function of a space may also dictate sizing and plant reliability. Essential services, such as data centers or hospitals, require reliability and redundancy with the use of a backup chiller or chillers for N+1 or 2N redundancy based on an owner’s requirements. Furthermore, the hourly building profile run time may require equal or unequally sized chillers.
Chiller compressors
The first category of chillers is defined by the method used to compress the refrigerant. Positive displacement compressors operate with two mechanical devices, such as scroll- or screw-shaped rotors. These devices trap refrigerant vapor and compress it by gradually reducing the volume to increase the pressure.
Most small chilled water plants—up to approximately 200 tons in capacity—use scroll compressors for production of chilled water. Scroll chillers start as low as 20 tons and increase in size to approximately 200 tons. As the capacity increases, the chillers increase the quantity of scroll compressors, typically of equal sizes to provide the total chiller capacity required. The disadvantage is that chiller capacity control is provided as stepped control instead of modulating control. Although the multiple compressors may be a disadvantage for capacity control, generally they are piped with multiple refrigerant circuits which provide some system redundancy. For example, an 80-ton chiller may have four 20-ton compressors, with two compressors on each refrigerant circuit. Failure of one compressor will cause a loss of capacity but will still allow the chiller to remain in service and provide partial cooling output.
Once the capacity exceeds the size of multiple scroll compressors, typically four to six 30-ton scroll compressors, chillers use screw compressors. Screw compressors are available in sizes up to about 500 tons. Screw compressors have the ability to vary the cooling output capacity from 100% to 20% via the use of a slide vane to limit refrigerant delivery to the compressor and provide a smooth, modulating transition between capacities. It is important to note that screw chillers have only one compressor, so a loss in the compressor would cause a complete loss in chiller capacity. Screw chillers typically have very good full-load and part-load kW/ton efficiencies. Screw compressors also are generally louder than scroll compressors, with higher noise levels in the lower frequencies octave bands.
The third and final type of compressor, a centrifugal compressor, operates on a different compressor philosophy that relies on dynamic compression to compress and raise the refrigerant pressure. A rotating impeller is used to accelerate the refrigerant and allow the conversion of velocity energy into pressure energy. Centrifugal chillers start at approximately 200 tons and go up to thousands of tons depending on the number of compressors. Centrifugal compressors are typically used for compressing large volumes of refrigerant to relatively low pressures and can be configured specifically to the application by changing the number of stages, compressor speed and size, impeller diameter, refrigerant type, and condenser and evaporator shell sizes. Capacity control of centrifugal chillers is accomplished through inlet vanes at the inlet of the compressor that varies the refrigerant flow in stages in response to the building load. A variable frequency drive (VFD) also could be used for capacity control to vary the speed of the impeller rotation in conjunction with inlet vanes. Inlet vanes and VFDs accomplish different objectives: inlet vanes are used for buildings that may have a large load variation, while VFDs should be used for buildings that have large variations in lift, which equates to changes in condenser relief. VFDs are not always an appropriate option for chillers and their use greatly depends their ability to vary temperatures. Regardless, close attention should be paid to low load conditions near 20% capacity, in which the efficiency degrades rapidly and causes the chiller to operate in a condition known as surging.
Centrifugal chillers also operate at high speeds, which can result in more vibrations and noise transmission into the building structure, but are extremely reliable and robust devices. Centrifugal compressors have great efficiencies throughout their operating range and are relatively compact for the amount of tonnage that can be provided per sq ft of mechanical room space. A centrifugal chiller can vary capacity continuously in lieu of stepped control, which can provide capacity output based on the building load profile. This enables accurate temperature control while using only the energy required. Figure 2 shows two centrifugal chillers serving an office building.
Heat exchangers
The next category of chillers is defined based on the type of heat exchanger used in the chiller. Heat exchanger selection can be either air- or water-cooled and will have a large impact on the efficiency and cost of the chiller. Air-cooled chillers are limited in size to 500 tons of capacity, whereas water-cooled chillers range to almost 9,000 tons.
Air-cooled chillers operate on the concept of using air to reject the building’s heat, which approaches the outside ambient dry bulb temperature. Consequently, air-cooled chillers must raise the refrigerant temperature and pressure to a higher condition and will require more energy to do the same amount of cooling compared to a water-cooled chiller. Despite this, air-cooled chillers offer the advantage of a packaged system with a single source of responsibility. Design and installation time are also reduced due to less equipment being involved: there is no requirement for cooling towers and associated freezing issues, consumption of makeup water and chemical treatment, or condenser water pumps. Air-cooled chillers use scroll compressors up to 200 tons and use screw compressors above 200 tons of capacity.
The alternative is water-cooled chillers. They operate by using water to reject the building’s heat, which approaches the outside ambient wet bulb temperature—which is typically lower than the dry bulb temperature. Therefore, water-cooled chillers are more energy efficient as the condensing temperature is lower and they require less work by the compressor to raise the refrigerant temperature and pressure. Although the chiller energy may be less than that of a comparable air-cooled chiller, one must still evaluate all the costs of the chiller system, including the cooling tower and condenser water pumps. The smallest water-cooled chillers (up to 200 tons) begin with multiple scroll compressors, those from 200 to 500 tons use screw compressors, and those above 500 tons mainly use centrifugal compressors. Water-cooled chillers typically last much longer than air-cooled chillers due to the location of the chiller inside of the building and lower operating pressures using water as a condensing fluid.
Another item to be aware of is the method of cooling the compressor and motor, which can be an open drive or hermetically sealed design. With an open drive chiller, the heat is rejected directly to the mechanical room and must be cooled or ventilated by ambient air, possibly requiring high volumes of air to cool the space. Also, contaminants can potentially get to the motor and refrigerant seals might leak if the seals are not properly maintained. Hermetic or semi-hermetic chillers are refrigerant cooled, and the heat is rejected to the refrigerant, reducing the heat rejection load in the mechanical room. These machines require no seals as the motor is completely contained within an enclosure, so there is no potential for refrigerant to leak out of the system.
Modular chillers
Modular chillers are the newest option in the chiller market and have been increasing in popularity. They are similar to building blocks in that you can add modules of varying capacities to reach the overall desired capacity. Typical modules are available in sizes of 30, 50, 70, and 85 tons consisting of scroll or screw compressors. The chillers are specifically designed to fit through doorways in new or retrofit applications and are extremely compact. Chiller modules up to 85 tons require only 10 to 12 sq ft of building footprint without the large clearance spaces required for evaporator or condenser tube pull. These modules can then be combined to approximately 1,000 tons of overall chiller capacity. When building loads increase or additions are built, an additional module of the necessary capacity can be installed, provided the distribution systems are set up for the additional load. Similarly, instead of purchasing a completely redundant chiller for N+1 capacity, an additional module can be added, providing redundancy for one module at fraction of the cost of purchasing an entire redundant packaged chiller.
Despite the advantages of modular chillers, one major disadvantage is the significant initial cost. Most modular chillers are about 150% to 200% the cost of a similar tonnage water-cooled chiller. Second, modular chiller efficiencies are typically not as attractive as standard water-cooled chiller efficiencies due to the compressors used in the chillers. Third, water treatment is extremely important as modular chillers use a plate and frame heat exchanger instead of a shell and tube heat exchanger, which must be cleaned to prevent fouling and plugging the heat exchangers. Duplex, external strainers should always be used to provide service of one strainer while maintaining operation through the other strainer. Similarly, the heat exchangers shall be fully serviceable with individual isolation valves to isolate the heat exchanger without shutting down the chiller. Figure 3 provides an example of a modular chiller with the heat exchanger in a fully serviceable position.
Chiller categories tend to have a lot of overlap and options within each capacity range and category described above. Figures 5 and 6 provide a simplified method to observe the ranges and compressor types for air-cooled and water-cooled chillers from the major chiller manufacturers.
Initial investment
Upfront costs are always a critical discussion in any project. In some projects, initial costs can outweigh lifecycle and operating costs. Since chiller costs vary so much, it is difficult to provide an overall initial cost for a chiller based on its size as multiple factors are associated with each chiller size based on manufacturer.
In general, scroll chillers are the most expensive of the three types of chillers discussed. Centrifugal chillers are the most cost-effective option but are not available in all tonnages. When screw and centrifugal compressors are both available options based on the capacity, screw compressors are typically 10% to 15% more expensive. Similarly, air-cooled chillers are typically a more expensive initial investment than a similarly sized water-cooled chiller when comparing strictly the initial cost of an air-cooled chiller versus that of a water-cooled chiller.
However, when evaluating the total installed cost of an air-cooled versus a water-cooled system, including all the necessary components for the system to be fully operational, the investment for the required components in a water-cooled system are always more expensive. The reason: An air-cooled system only requires chillers and chilled water pumps, whereas a water-cooled system requires the chillers, chilled water pumps, condenser water pumps, and cooling towers for fully functional system and to reap the energy efficiency benefits.
A sample project is also presented to illustrate the variation in initial chiller costs. This project involves the replacement of two 180-ton centrifugal, water-cooled chillers from 1980.To determine the best chiller for the project, a procurement specification was issued designating the chiller capacity, maximum evaporator and condenser pressure drops, efficiency criteria, maximum sound levels, and the maximum size constraints. Manufacturers were then encouraged to bid any type of chiller that met the requirements of the performance specification. The results included a mixture of efficiency levels, scroll chillers, screw chillers, and modular chillers. For this tonnage there is a 44% variation in costs.
Chiller operating costs
Once a chiller is procured, the cost of ownership continues with operation and maintenance costs for the remainder of the chiller’s life. The typical life span of an air-cooled chiller is generally 15 to 20 years based on the chiller’s location in varying exterior conditions. A water-cooled chiller has a life expectancy of around 20 to 30 years, with some lasting much longer with proper maintenance.
Many items affect the operating cost of a chiller, including building loads, chiller run time, control system integration, compressor unloading, evaporator pressure drop, and condenser pressure drop. Similarly, many programs and methods exist for determining annual operating costs. One commonly used method in chiller plant analysis is to use the integrated part-load value (IPLV) rating from AHRI 550/590 – Performance Rating of Water Chilling Packages Using the Vapor Compression Cycle to calculate costs quickly from a single value. IPLV is a blended kW/ton based on a predefined percentage of operating hours at respective percentages based on pre-defined operating conditions, such as 44 F chilled water supply at 2.4 gpm/ton and entering condenser water at predefined temperatures at 3 gpm/ton. A variation of IPLV is NPLV, which uses nonstandard temperatures based on actual operating conditions instead of the AHRI defined temperatures in the standard. In either case, the kW/ton value is calculated based on the following equation:
Where:
• A = kW/ton at 100%
• B = kW/ton at 75%
• C = kW/ton at 50%
• D = kW/ton at 25%
AHRI 550/590 Appendix D specifically states in the scope that “The IPLV equations and procedures are intended to provide a consistent method for calculating a single number part-load performance figure of merit … and was derived to provide a representation of the average part-load efficiency for a single chiller only.” The standard further states that “it is best to use a comprehensive analysis that reflects the actual weather data, building load characteristics, operational hours, economizer capabilities and energy drawn by auxiliaries such as pumps and cooling towers, when calculating the chiller and system efficiency.”
It is important to note that AHRI 550/590 was created to compare the unloading characteristics of similar chillers and not to be used as a basis to determine operational costs for chillers. Also, most chiller systems are operated in multiple chiller plant systems, not individual operation per the rating method. The whole system must be analyzed as an entire package including pumps, chillers, towers, weather, and building loads to determine the most cost-effective solution and optimize the entire plant in lieu of individual components. A single number IPLV provides a predetermined unloading of your chiller, which may or may not be accurate for your building and assumes that the chiller receives condenser relief, and therefore a reduction in power because lowering the condenser water temperature greatly affects chiller power consumption.
In lieu of using a single kW/ton value to determine plant operating costs, a more detailed review of the system must be made because kW/ton is highly dependent on the actual operating conditions and the chiller type selected. The weather is continuously changing in all locations, and outside ambient dry bulb and wet bulb have a significant impact on condenser operating conditions (air- and water-cooled). Similarly, a building and chiller load profile also shall be used in conjunction with weather data to determine chiller operating costs. A load profile will be different for every building depending on building type, building schedule, and other outside factors. With this information, one can analyze if the chiller selected can turn down to part-load capacities and what the efficiencies are expected to be at these part-load conditions, as most chillers will operate the majority of their hours at part load.
Finally, energy costs should be calculated using a load program. Some programs do not require entering the entire project to do simple chiller plant analysis. Also, load programs can quickly and easily apply actual building rate structures to an analysis, including any ratchet charges, consumptions charges, and demand charges. To properly analyze each option, chiller selections should be provided with an unloading curve in at least 10% load increments. This is sufficient for an analysis and will yield relatively accurate results without much effort.
Chilled water pumping arrangements
A chiller plant is not complete without the pumping arrangement to distribute chilled water throughout the building or campus to the chilled water coils. There are multiple arrangements for distributing chilled water. This article will describe the two most commonly used methods of chilled water pumping, variable primary flow (VPF) and primary-secondary, and how they relate to initial investment costs and operating costs for the chiller plant.
In both pumping schemes, the flow to chilled water coils in the system is variable flow as the cooling coils are equipped with two-way temperature control valves. The difference exists in the way the pumping is handled through the chillers. In a VPF system, the flow varies in the entire system, including through the chillers, which is a shift from the previous mind-set that chillers always require a constant flow through the evaporator. However, recent advances in control technology have allowed the ability to vary the flow through the evaporators within the manufacturer’s recommended ranges and can provide substantial energy savings.
Because of the ability to vary flow, these systems eliminate the need for secondary distribution pumps and use multiple pumps in parallel to serve the entire chilled water system, including the chillers and any coils in the system. These pumps handle the entire system head at the required system flow rate. VPF requires a minimum flow bypass pipe, which includes a control valve to protect the chiller from falling below the minimum flow rate and temperature control isolation valves at each chiller to isolate flow through the chillers when they are not in operation. Some designers prefer three-way valves at a select number of coils to provide minimum system flow, but this will increase the pumping energy required in the system by increasing flow in all conditions except when the system is at minimum flow. The system minimum flow is maintained by using a flow meter or measuring the pressure drop across the chillers to determine system flow to control the bypass valve.
In a primary-secondary system, two sets of pumps are used, each with a dedicated function to the chilled water system. The primary pumps serve as production pumps and serve only the chillers in the system. These pumps are typically high-flow, low-head constant-flow pumps staged on with a chiller to provide available chilled water to the secondary pumps. The secondary pumps serve only the chilled water coils in the system, which are equipped with two-way control valves as explained above and are high-flow, high-head variable speed pumps that vary the system flow in response to the load. The primary and secondary loops are connected via a common pipe or de-coupler that is a shared portion of the piping circuit in each loop that hydraulically separates the two loops so flow in one loop does not affect the flow in the other. This will allow the water to flow through the common pipe in either direction to hydraulically balance the system. These systems are typically older systems that require a constant flow through the chiller, but can still be used as a fail-safe solution due to their simplicity.
The advantages of VPF systems are directly related to the pumping concepts described above. VPF systems will always have fewer pumps compared to a primary-secondary system, which will save initial costs from less piping and valves, fewer electrical connections, less controls work, and no vibration isolation at the additional pumps. Similarly, one set of pumps will save on mechanical room space requirements, which can lead to substantial initial cost savings in building footprint or increasing useable building square footage. The one thing that must be addressed is the more complex staging controls and ensuring minimum flow in the system at all times, but this will still maintain an overall net savings in initial cost.
For operating costs, VPF systems will always have lower operating costs as there is less pressure drop in the system due to fewer pumps and accessories at the pumps, but also because the pumps will be more efficient. The VPF pumps allow the designer to select larger, more efficient horsepower pumps instead of smaller, constant volume, low efficiency circulator pumps typically found on the primary side of the primary-secondary system. Also, the use of variable speed in the entire system will allow the entire system flow rate to vary, which will provide operating cost savings as energy will vary approximately with the cubed power of the flow rate. This is in contrast to constant volume pumping and energy consumption at the primary pumps and variable flow at the secondary pumps in a typical primary-secondary system.
Chilled water plants and chillers are dynamic systems that rely on careful analysis to determine the right chiller for a building. There is no simple answer based on the type or size of the building; however, understanding the options based on building load and the compression methods can help narrow down the alternatives for further evaluation. One can select chiller variations that can be analyzed based on initial cost and overall system operating costs. A chiller with a more expensive initial investment may prove to have the best overall operating costs by using an energy simulation program that can evaluate the building load profile over time with respect to corresponding weather data. Clearly, there are multiple different chiller options, and careful analysis, rather than a blended kW/ton value, is required to make the best selection for your situation.
David Grassl is a mechanical engineer at Ring & DuChateau, and an adjunct professor in the Civil & Architectural Engineering & Construction Management Department at the Milwaukee School of Engineering. He has analyzed and designed approximately 10,000 tons of chilled water systems for plants ranging from small, individual systems for office buildings to large, complex central plants for universities.
References
Bhatia, A. 2012. Overview of Chiller Compressors. PDHengineer Course HV-4004. Houston, TX: PDHengineer.
ASHRAE. 2011. Handbook of HVAC Applications. Atlanta, GA: American Society of Heating Refrigeration and Air Conditioning Engineers, Inc.
AHRI. 2003. AHRI 550/590, Standard for Performance Rating of Water-Chilling Packages Using the Vapor Compression Cycle. Arlington, VA: Air Conditioning, Heating, and Refrigeration Institute.
Geister, W. Ryan and Thompson, Mike. 2009. A Closer Look At Chiller Ratings. ASHRAE Journal, Vol. 51, No. 12, p. 22-32. Atlanta, GA: American Society of Heating, Refrigeration, and Air-Conditioning Engineers Inc.
Taylor, Steven T. 2002. Primary-Only vs. Primary Secondary Variable Flow Systems. ASHRAE Journal, Vol. 44, No. 2, p. 25-29. Atlanta, nGA: American Society of Heating, Refrigeration, and Air-Conditioning Engineers Inc.

Venture Engineering Introduces the New Trend of Air Cooled Chillers

on 20/06/2023

GAMI GCU R-134a Chillers are the latest series of chillers meeting superior specifications which are mandatory for our region to withstand harsh climatic conditions. This range of air cooled screw chiller is available from 55 TR to 425 TR with 60 Hz power supply and is suitable for high ambient operation up to 52 C. These chillers are equipped with high-efficiency semi-hermetic screw compressors which offer excellent part load performance due to electronic expansion valve and condenser pressure control and long lasting robust operation. Each of these chillers will have two independent refrigerant circuits in order to offer redundancy during scheduled maintenance. The cooler offered in this chiller is direct expansion (DX) type with shell and tube evaporator configuration which is convenient for site personnel to perform cleaning procedures. The structure of the chiller incorporates minimal vibration and a low noise design. One of the key advantages is that the chiller has a compact and modular design and utilizes a small footprint for installation at site. Adding to the convenience of our customers, this chiller will be shipped in two sections for safe and easy lifting. COMPRESSORS GAMI GCU R-134a series Chiller uses COMER brand Semi-hermetic screw compressors with the latest and advanced 5:6 ratio patented screw rotor profile, which makes it highly efficient & best reliable in all operating conditions. These compressors are designed specifically for modern refrigerants, having the following characteristics: Long-life bearings. Double-walled rotor housing. Precise capacity control through injection & by passing of oil with pressure differential. Continuous (Steeples) capacity control system and automatic start unloading as standard. Refrigerant compression is achieved through the below processes and thus giving higher part load efficiencies. Suction & Sealing Compression Discharge.
COMPRESSORS The compressors can be loaded depending upon the requirement through a microprocessor which precisely modulates itself accordingly. All compressors are provided with motor winding temperature protection, discharge temperature protection, phase reversal protection, phase failure protection and oil level protection. Screw compressors in GAMI GCU R-134a Series provide virtually maintenance-free operation as there are fewer moving parts. Long file special bearings facilitate longer run periods of compressor without any need for maintenance. EVAPORATORS GAMI GCU R-134a series Chiller uses direct expansion shell & tube compact type evaporators. The tube bundle, directly welded to the shell, is not removable, the straight tube configuration allows anyway to clean easily the inner tubes. The standard construction of the shell & tube evaporators consists of the following materials: Cast ductile iron or carbon steel for headers, Carbon steel for tube-sheets, shell, refrigerant and water connections, Copper for exchanger tubes, Plastic material or carbon steel for baffles, Asbestos free and O-Ring gaskets Alloys steel bolts and nuts maximum working pressure of 16 bar (at Shell side) & 23 bar (at Tubes side) to ensure the reliability of its operation to withstand the requirements. The evaporator shell will be provided with factory fitted thermal insulation. Evaporator will have one water inlet & outlet connection suitable for Victaulic couplings. Evaporators are available both with CE and ASME certification as per requirement. Evaporators are insulated & have a fouling factor of m 2 K/W moreover, they are tested.
The Company has Successfully undertaken several MEP and HVACR projects on a turnkey basis by providing, Reliable, and technical work manship to 410 bedded Bahawalpur General Hospital, 100-Pediatirc center Bahawalpur, 200-Bed General Hospital Dirkot Azad Kashmir, 220-Bed Instuite of Cardiology Rawalpindi, Butch International Hospital, Pepsicola International, Park Lane Hotel, Leader Inn Hotel, English Pharmaceutical, Pacific Pharmaceutical, Forman Christian Collage, Marvell Hotel, Millennium Mall Quetta, Kings Shopping Mall Gujranwala, Defense Community Club Lahore, Serobiology Lab , Trauma Center, OT Complex of Dow University of Health Sciences Karachi, Mega Projects: Mall of Sargodha, Civil Secretariat Multan, Al Asar mall of MandiBahuddin besides services to several private and public sector companies.

IMS knows how to serve in face of modern challenges
An exchange with Engr. Mairaj Asghar,
Manager Maintenance looking after
maintenance department at IMS Engineering

on 20/06/2023

Engr. Mairaj Asghar, : A rise in temperatures means a rise in the use of HVACR equipment and it thus accelerates the maintenance requirement of the systems. We all know the installation of BMS is meant to provide a comfort zone and simultaneously save energy. The maintenance of the systems is a must to synchronize the input with the output. We put our fullest effort into the maintenance of the system for achieving maximum output.
ER: In the current economic profile, the clients are forced to go for savings and many opt to hire cheaper services. What special services do you offer that they are forced to attract to you?
MA: There are two categories. One, who doesn’t think this way as they are informed ones who know very well about the benefits. They don’t opt for cheaper systems as they know they cannot get what they do with the smarter systems that we offer. However, we offer some relaxation to those who contemplate cheaper services or think of acquiring services from unauthorized companies. Of the latter, most of them give serious thought to our offer and agree to acquire better services. Since we are a 25-year experienced company with highly trained staff, the people find it harder to evade our services. Those who still turn hard nuts, also ultimately turn to us realizing they failed to get the maximum output required for their systems.
ER: In today’s supply chain issues how are you ensuring that the systems should function properly and services continue unhindered?
MA: This is a big challenge and we are enduring it for the last seven to eight months. Thanks to God, we were maintaining quite a stock that we used for the maintenance services. We maintain our inventory as well as request our clients to do it to some extent too, so that we keep our downtime at a minimum possible as keeping the system down affects the cost of production. Now the supply side has improved and we are receiving the materials but still, we maintain inventory.
ER: Temperatures continue to rise for Climate Change. How it is affecting HVACR and what challenges do you think are to come in the future?
MA: Since we offer control, we do not supply HVACR equipment but still, we are informed of these issues in the backdrop of climate change. We ask our clients to remain updated in the context of maintenance and updating of equipment. We suggest they maintain the systems for keeping up the schedule. This way we can continue with the system and avoid ill impacts.
ER: Tell us about the expansion of IMS and in which areas is it working
MA: IMS started with building management systems which also include controls, lighting controls, fire alarms, etc. We have now moved to the power sector and after taking over Schneider’s manufacturing division in Pakistan we are in the electric panels business and switchgears.
We now offer services in the textile sector, and pharma where we are very much in, then in the banking sector, the industrial sector in Port Qasim, where we are providing services in security and fire alarm systems.
ER: There is much talk about Make in Pakistan after our economy faced issues. What do you think as an engineer if we possess the capability to make all systems in Pakistan that we import?
MA: Surely we are capable to do it. People from here go abroad and serve these companies that export this equipment and systems to Pakistan. The issue is that the government should take it seriously as there is an industry that is serious to do it but the government has to take the initiative.
Either our own industry can start local manufacturing or foreign investors can be invited to do it in Pakistan but what we need is some serious steps on the part of the governments.

Geothermal cooling, heating being tipped off to brave climate change in Pakistan

on 20/06/2023

The world is witnessing two big changes, one is caused by climate change, and the other is a result of newer technologies. Jafri Associates has surely a reason to dwell upon these changes for over half a century of its life as a reputable company in Pakistan. Engr. Tanveer Jafri, leading the company after his father Engr. Syed Sibte Ahmed Jafri has plenty to talk about the said changes on our globe.
ER: How has climate change and eventual rising temperatures affected the thought process and design of the buildings in the world especially in Pakistan?
TJ: During its lifespan of half a century after its foundation by my father, Jafri Associates has worked in Europe and the US. This work is focused on the design of green buildings. This makes us a bit advanced in comparison to others in Pakistan. Normally, the lead design goes to minimize waste and is carbon neutral but now the fundamental change in building design emerging is load elimination. In other words, it is about bringing to an end the external electricity requirement of the building. It means a minimum possible dependence on the grid. It means it is time to go in the past and incorporate that technology in the design. Thus, the thermal load for HVAC turns minimal. In normal buildings, the dependence is on thermal load for maintaining the environment of the building, and in return, it pollutes the environment of the globe. Now natural resources are being tipped for incorporation into the buildings. To achieve this, engineers have to share techniques with the architects for incorporation into the buildings.
For instance, areas like Shahrah e Faisal of Karachi are so densely populated that there is no room to incorporate such techniques in the buildings. However, in New York, they have used a geothermal system and dug deep down to get water for chillers. Geothermal cooling and heating are also pos-
sible in Pakistan and also use renewable energy to make buildings and even homes carbon neutral.
The issue with solar and wind is how to get rid of scraps after the expiry of the equipment. We still have time to learn even if we install 10 thousand megawatts of solar and 50 thousand megawatts of wind then how we will deal with their scrap.
We have recently offered our two clients to eliminate 30 percent load of the buildings. Had I got more space I would have turned much of the HVAC off the grid. We have to be futuristic after all otherwise we will lag behind in the market.
We must know cooling system technologies are available and they can provide you steam. In Palestine, 90 percent of houses have solar hot water. This system did not succeed in Pakistan because the consultants did not design it. It was a make-shift solution offered by retailers and was doomed to fail. This is something that only consultants can do.
ER: How can we convince the industry to opt for the solutions that you are talking about? How can we amend the systems of the buildings that are already constructed in congested areas?
TJ: There are two important steps to be taken. One, the government should not permit split or window AC in any building more than four stories. Why? Because it increases the load and also increases fire hazard in the building. Two, the buildings in areas like I.I. Chundrigar Road of Karachi should be given a centralized HVAC system by acquiring land at the City Station Karachi. This should be done immediately as it will reduce energy consumption. In all big cities’ downtown areas, such centralised district systems are functioning. It reduces the energy consumption of the building by 40 to 60 percent.
ER: Do you see any collective effort to convince governments, developers, and the industry?
TJ: I must say every government tries to improve things, their departments do not start anything to do anything wrong. The issue is, the advisory channels fail to provide correct advice to them. There is a lack of true advisors in Pakistan and it is caused by the chain of education and jobs and thus the knowledge is blocked.
ER: You talked about knowledge, which is seen in the backdrop of AI and ChatGPT. How is it affecting consulting companies?
TJ: The core engineering including building design will be converted to AI within the next decade. We will put the data and will get the required complete design and other requirements. But the consultants who would not use AI and offer out-of-the-box solutions will beat AI-based output. Even if the industry or any individual uses Chatbot to design its building and hand it over to the contractor, they have to revert to a consultant when the building will start confronting issues. Suppose, even if we get everything from AI, understanding it and the execution will always remain with the engineer who after all has to educate in an engineering university where teachers are to educate undergraduates. AI is no doubt important. Jafri Associates is using it smartly and we need our intelligence to benefit from AI Technology which has to be adopted for increasing productivity.